WATER METERS

'CAPSTAN', 'KRANTI', CHAMBAL & 'ANAND ASAHI' BRAND

Water_Meter_2

Domestic Type

Flanged_Water_Meter

Interchangeable Type

wolkman_type_water_meter

Domestic Type

 

'INFERENTIAL DRY TYPE' - STRAIGHT READING - DOMESTIC TYPE SCREWED END : 15mm, 20mm, 25mm, 40mm & 50mm Size.

SPIRAL' (BULK) TYPE - ENCLOSED & INTERCHANGABLE TYPE FLANGED END : 50mm to 600mm. Size.

Watermeters are suitable for measurement of large flows of water where little head is available, particularly for consumers such as industrial units, societies, bungalows & flats drawing water supplies from single mains.

The meters are caliberated in kilo-litres & accurately register flows within a limit of ±2% over their wide measuring rang (1 kilo litre= 1 cubic meter= 1000 litres); the meters confirm to ISS 1536 / 1538.
Meters are suitable for use with water temp. upto 45ºc. (Hot water meter - water temp. upto 85ºc The meters are tested to withstand a pressure of 16 kg/cm2

Precautions:

1) The meter should be so installed that water always flow in a horizontal straight line. It is recommended that there should be a straight pipe length before and after the meter equivalent to ten times its nominal size.

2) External strainer must be installed on inlet side of the water meter.

3) The watermeter should be handled with great care so as to avoid any jerk or fall
    which can damage it & can affect its performance

4) The meter should not be buried underground.

5) Non-Return (Check) Valve on outlet side of the watermeter is preferable.