Cast_Steel_Globe_Valve Cast_Iron_Globe_Valve Screwed_End_Gun_Metal_Globe_Valve Flanged_End_Gun_Metal_Globe_Valve
Cast Steel Globe Valve Cast Iron Globe Valve Gun Metal Globe Valve
(Screwed End )
Gun Metal Globe Valve
(Flanged End )

Available in : Cast Iron, Cast Steel, Copper Alloy, Gun Metal & Stainless Steel.

CAST IRON GLOBE STOP VALVES

SPECIFICATIONS :
Class/Pressure Rating
Test Pressure
Body
Seat
 

PN-16

24 Bar

16.0 Bar

CLl-125

24.1 Bar

13.8 Bar

SIZE RANGE :

All sizes from 1 - 1/2" to 12"

PRODUCT STD.:
BS: 5152 PN-16/ , CL-125.
MATERIAL :
Cast Iron to BS: 1452 Gr 220, IS: 210 Gr FG200. Other grades of materials can be provided on request.
TRIM : Cu Alloy or Stainless Steel as per customer requirement.

END DETAILS :

Flanges of flanged valves can be:
(i) PN-16 of BS: 4505/ DIN 2533
(ii) ANSI: 16.1 CL. 125
(iii) IS: 1538

TYPES :

>>> For Globe Valves :
(i) Straight Patt
(iii) SDNR Type
(ii) Right Angle Patt
(iv) With plug/Needle  Disc
>>> For Check Valves (Non Return Valve) :
(i) Horizontal Check for Horizontal pipe line
(ii) Swing Type / Flap Type check valve for horizontal & vertical pipe line.

OPTIONAL FEATURES :

GlobeValves can be provided with gear operator, motor actuator, chain wheel arrangement, extension arrangement, open shut indicator, locking arrangementand special type of gland packing etc.

CAST STEEL GLOBE VALVES

SPECIFICATIONS :
Class/Pressure Rating
Test Pressure
Body
Seat
 
HYD.
HYD.
AIR

CLASS 150

30 Bar

22 Bar

6.9 Bar

PN-40

60 Bar

40 Bar

6.9 Bar

SIZE RANGE :

All sizes from 1 - 1/2" to 12"

PRODUCT STD.:
Class 150 0f BS: 1873/ASME: 16.34 or PN-40 of BS: 5160.
MATERIAL :
Carbon Steel to ASTMA 216 Gr WCB. Other grades of materials can be provided on request.
TRIM : Stainless Steel (Type 410, 304 or 316) as required. 13% Cr. trim, valves shall have hardness differential of 50 BHN at seating portions subject to a minimum harness of 250 BHN. The seat faces can also be deposited with Co-Cr-A alloy (Stellite-6 or eqv.) in which case minimum 350 BHN hardness is maintained.

END DETAILS :

>>> Flanged : as per CL-150 of ASME-16.5 or PN-40 of BS: 4504.
>>> BUTT WELDED : as per ANSI 16.25 as per relevant class of ASME 16.34

PRESSURE TEMP. RATING :

Pressure Temperature ratings shall be as per relevant table of ASME 16.34, / BS:5160.

OPTIONAL FEATURES :

Valves can be provided with gear operator, Motor Actuator, Chain wheel arrangement, extension arrangement, open shut indicator, locking arrangement and special type of gland packings etc.

COPPER ALLOY GLOBE VALVES

SPECIFICATIONS :
Class/Pressure Rating
Test Pressure
Body
Seat
 

PN 16

24 Bar

17.6 Bar

PN 20

30 Bar

22.0 Bar

PN 25

37.5 Bar

27.5 Bar

PN 40

60 Bar

40.0 Bar

CLASS 1

1.5 MPa

1.0 MPa

CLASS 2

2.4 MPa

1.6 MPa

SIZE RANGE :

All sizes from 3/8" (10mm) to 4" (100mm)

PRODUCT STD.:
BS: 5154 or IS: 778 as Specified.
MATERIAL :
Valve Body & Bonnet to BS 1400 LG2 or IS 318 LTB- as per applicable product standard.

END DETAILS :

>>> SCREWED : Female threads to BS:21 or IS:554.
>>> FLANGED : as per relevant table of BS: 4504 0r BS: 10. Other type of threads / flanges available on request.

BODY-BONNET :

Normally the body-bonnet connection is screwed in type.

CONNECTION :

Bolted bonnet, screwed on bonnet and union bonnet can be provided on request.

STEM TYPE :

Normally the valve shall be with non rising stem on request.

OPTIONAL FEATURES :

>>> Open Shut Indicator, locking arrangements & special gland packing etc. on request.
>>> Valves as per ISI Specifications are available with BIS Mark.